|
 |
 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
|
|
||||||||||||||||||||||
|
Main: Primary Breakdown: Canter - 4 Sided:
HewSaw R200 MSA-SE (moving saw assembly w/separate edging)  More Images: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Product Number : 4386 Description : Specifications:- Feed opening - 13.7" x 13.7" - Log range - 2.5" min - 14" max - Log length - 8 ft to 10 ft - Cutting width min/max - 1.70" - 8.0" - Cutting height min/max - 1.70" - 8.9" - Saw kerf - 0.125" - 0.160" (depending on sawing patterns) - Saw diameter - 13.8" - Length of chips - Adjustable - depending on feedspeeds - Feed rate - 250 - 550 ft/min (depending on sawing patterns) - Approximate machine weight - 36,000 lbs R200 MSA-SE, 11,500 lbs prefeeder, 1,200 lbs scanning conveyor - Scanning conveyor c/w electric drive - HewSaw mechanical prefeeder c/w hourglass rolls, holddown roll and electric drives - HewSaw R200 MSA-SE - Infeed tire guide rolls - Round wood guides - Side heads c/w motors - Top & bottom head c/w motors - Chipping head (4) new stainless style with face plate and no skim saw - Double arbor saw section (setting) c/w saw assemblies - Top and bottom edging modules - Feedworks - Eleven (11) setworks cylinders c/w temposonic probes - Machine mounted components - Perceptron scanning and optimization system - Operator's console with joystick and selectors - Omron PLC controller in a cabinet and junction boxes (by Prologic) - Delta Tau setworks controller (eleven (11) axis control) - NT631C (touch screen) for HMI - BEI encoder - Hydraulic power unit; 250 US gallon tank, 1 x (50 HP) 50 GPM, 1 x (30 HP) 30 GPM circulation pump 1 x (5 HP), filtration system, 1 x (2 HP) cooling system, 5 gallon accumulator system and heater - Outfeed belt conveyor, approximately 6' long x 18" wide c/w electric drive - RM-10C & D Knife Grinders for chipping knives and edging knives Motor List (575 volt / 3 phase / 60 hertz) - Scanning conveyor - 1 x 10 HP x 1800 RPM (VFD) - Prefeed device - 1 x 7.5 HP / 1 x 10 HP x 1800 RPM (VFD) - Infeed tire motors - 2 x 7.5 HP x 1800 RPM (VFD) - Chipper head motors - 2 x 100 HP x 1800 RPM (top & bottom) (VFD) - Chipper head motors - 2 x 125 HP x 1800 RPM (sides) (VFD) - Internal feed rolls - 2 x 5.5 HP x 1800 RPM (VFD) - Circular saw motors - 2 x 150 HP x 3600 RPM - Edging tool motors - 2 x 60 HP x 1800 RPM (VFD) - Outfeed wheel motors - 4 x 7.5 HP x 1800 RPM (VFD) - Outfeed cleaning brush - 1 x 2 HP x 1800 RPM - Hydraulic system - 1 x 50 HP / 1 x 30 HP / 1 x 2 HP x 1800 RPM - Compressed air connection - Min. 90 psi / Max 110 psi, 135 cfm - 70 cfm HewSaw R200 main, 30 cfm edging section cleaning, 30 cfm prefeeder, 5 cfm scanning conveyor
| ||||||||||||||||||||||||
| Top | ||||||||||||||||||||||||
|
