|
 |
 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
|
|
||||||||||||||||||||||
|
Main: Log Processing: Debarker - Ring:  More Images: 1 2 3 4 5 6 7 8 9 10 Product Number : 4878 Description : - Built in 2001- Model 636FC-22 - Left hand (ring pullout on right) - One (1) six (6) tool air seal ring assemblies - Replaceable carbide tips - One (1) 125 HP @ 900 RPM ring drive motors (460/3/60) - Two (2) sets of four (4) top and bottom feedrolls - Two (2) 30 HP @ 1200 RPM feedworks motors (460/3/60) - Ceased operation in 2007 - Hydraulic power unit - Very good condition - No controls 2001 VK 36" debarker. This is a Valon Kone Kodiak Debarker 36" dual ring, was commissioned in 2002 and decommissioned in 2008. It comes complete with a hydraulic power pack for the lube system and rotor ring pull out. The rotor has one (1) 125 HP, 900 RPM motors and the feedworks comes with two (2) 30 HP, 1200 RPM. There is also an accumulator tank and some other spare parts available with the machine. Frame - Heavy-duty, fabricated steel box construction - Multiple access doors for service - All modular construction - Heady constructed bark guards - Pull-out rotor slideway Feedworks - Modular design - Automatic self-opening - Top mounted feedroll cylinders - High strength, stress relieved feedroll housings - Oversized linkage pins c/w hardened bushings - Compact feedworks design to facilitate short logs - Direct coupled side mounted drive for ease of service - Prestaged feedrolls Feedrolls - Eight (8) feedrolls - Oversize rolls - Forged vee flytes - Soft opening (automatic) - Minimum log surface damage, spikeless feedrolls Rotor - Internal adjustable tool stops - Stress relieved rotor housing - Air seal rotor - Rotor bearing - double row ball bearing - Bell crank shaft - front bearing - double row tapered bearing - Bell crank shaft - rear bearing - double row cylindrical bearing - Higher thrust/radial load capacity - Tool shaft supported both ends Tool Tensioning Cylinder - Oversize rod and pins - Replaceable steel barrel - Extra long gland bushing - Guide rings on piston Tool Arms - Six (6) tool arms - Fabricated high strength alloy - Optimized tool arm geometry resulting in minimized log end damage - Automatic soft opening - Replaceable carbide tips - Three (3) pre-select tool arm pressure settings (or) - Fully automatic based on log diameter and feedspeed Air Management System - Valon Kone air seal - Maximize flow of air to tool cylinder for improved response time - Balanced air flow - All standard valves and fittings - Pre-select tool pressure settings - Banner beam array for automatic tool settings - Auto tool opening on log stop or reverse - Quick air exhaust valves - Pre-staged feedroll position
| ||||||||||||||||||||||||
| Top | ||||||||||||||||||||||||
|
